Set up the BETACHEK app on Android

1 – Install the app
Install the free BETACHEK Diabetes Management app on your mobile device – from the Google Play Store under BETACHEK Diabetes Management.

2 – Turn on wireless
Enable the pairing function on your mobile device.

3 – Turn on pairing mode on the meter
Press and hold the S and M buttons at the same time until the flashing wireless pairing symbol appears.

4 – Open the app and connect
Open the BETACHEK app and go to "Settings" → "Selected device". The app searches for the BETACHEK C50. Press "Connect" when prompted. Once paired, the meter beeps and the app shows "Paired".

If pairing fails (E-0)
Make sure the meter and mobile device are less than one metre apart and try again. If that doesn't help, close and reopen the app, go to Settings → Selected device and press "Forget", then turn on pairing mode on the meter again.

After pairing, the time and date sync automatically with your mobile device.